How to source green tea extract without guessing the grade
What we establish before quoting a green tea extract order. Most green tea extract enquiries arrive with a competitor price and a sheet that says only “green tea extract”, so the first thing we establish is the assay basis: ours is total catechins at 50% or higher with EGCG at 25% or higher as marker, both measured by HPLC, and a price quoted against a material whose catechin percentage is measured a different way cannot be compared with it. We then ask whether the formula needs the decaffeinated option, because decaf grades are a separate production decision and belong on the sheet. We ask which application the powder is going into, since weight-management stacks, antioxidant complexes and sports formulas on one side and ready-to-drink teas, energy drinks and nutricosmetic blends on the other pull the specification in different directions. Packing comes next: a 25 kg fibre drum with a double polyethylene liner as standard, foil bags for pilots, OEM under the buyer’s own brand if needed. Samples are always drawn from production lots, so what the buyer tests is the material that would ship.
Green tea extract is one of the most requested botanical ingredients in the industry, and one of the easiest to mis-buy, because the market uses the same name for materials that differ in catechin basis, EGCG content and caffeine level. The grade we supply is a water extract of Camellia sinensis leaf standardised to total catechins at 50% or higher with EGCG at 25% or higher as marker, both by HPLC, and it is supplied as a raw ingredient for manufacturing. This guide covers how to source green tea extract: what the material is, the specification line by line, what it is bought for, and what a first order looks like. If you are comparing several suppliers at once, the mechanics below are the same ones we apply to every green tea extract quotation that leaves this desk.
What green tea extract is
The source line on the sheet reads Camellia sinensis (L.) Kuntze, leaf. The process line reads water extraction followed by spray drying, which is what turns the leaf into a yellow-green fine powder that disperses in water-based formulas. The assay line is the one that defines the grade: total catechins at 50% or higher (HPLC) with EGCG at 25% or higher (HPLC) as marker. Two details matter before prices are compared. First, the method: both catechin figures are HPLC numbers, and a sheet that quotes catechins without naming the method cannot be compared line by line with one that does. Second, the marker: EGCG is the marker catechin, so a material can meet a total-catechin number while falling short on EGCG, and the two lines together are what make the sheet honest. A typical lot carries 2.8% caffeine on the COA, and a decaffeinated option is available where the formula needs it.
The green tea extract specification, line by line
| Line | Standard grade |
|---|---|
| Botanical source | Camellia sinensis (L.) Kuntze — leaf |
| Process / solvent | Water extraction, then spray drying |
| Assay | Total catechins ≥ 50% (HPLC); EGCG ≥ 25% (HPLC) |
| Caffeine | Natural level retained (typical lot 2.8%); decaffeinated option available |
| Appearance | Yellow-green fine powder |
| Particle size | 80 mesh |
| Loss on drying | 5.0% or less |
| Packing | 25 kg fibre drum, double polyethylene liner |
| Shelf life | 24 months in unopened original packing |
The physical lines are the ones buyers skip and then ask about later. Loss on drying is limited to 5.0% or less, and that line, together with the assay, is what the lot COA reports against. The mesh line reads 80 mesh as standard, which blends into dry matrices without a separate milling stage. On purity, residual solvents are held within ICH Q3C limits, and the partner line dedicated to tea polyphenols keeps this grade — and the related tea polyphenols ingredient — on equipment that does not carry cross-contamination risk from other botanicals. If your specification sets a caffeine ceiling, say so when you request the sheet, because the decaf option is a documented grade rather than a processing favour.
What green tea extract is bought for
Six applications cover almost every enquiry we see:
- Weight-management stacks — the home application, where the catechin assay and the EGCG marker are the lines the formula is costed on
- Antioxidant complexes — blended alongside other botanical antioxidants, where the HPLC-stated assay keeps the blend’s declaration consistent
- Sports and energy formulas — where the natural caffeine level is often part of the intent, and the 80 mesh grade blends into pre-workout style dry blends
- Ready-to-drink teas — the water-soluble spray-dried powder is reconstituted directly in the brew line
- Energy and performance drinks — dispersed in the mix step without a separate hydration stage
- Nutricosmetic powder blends — where the yellow-green powder sits acceptably in beauty-from-within sachet formats
What changes between these formats is not the material but the caffeine decision and the trial: the same green tea extract powder goes into all six, and the question to settle first is whether the formula takes the natural caffeine level or the decaffeinated option. As with every botanical we supply, the material is sold as a raw ingredient for manufacturing; label claims for the finished product are the buyer’s responsibility in their own market.
What a first order looks like
- MOQ: 1 kg
- Samples and pilot runs: 1 kg and 5 kg foil bags, drawn from production lots
- Standard packing: 25 kg fibre drum with a double polyethylene liner
- Lead time: in-stock items ready in about 2 days; bulk production 3 to 5 working days after deposit
- Transit: Xi'an to Shenzhen consolidation about 3 days, then about 6 days by air to major U.S. and EU airports, or 18 to 25 days by sea
- OEM: packing under your own brand, artwork handled under confidentiality
Samples are always drawn from production lots, so what you test is the material that would ship; the free quantity depends on the item's value, and anything beyond is billed at cost plus courier and quoted up front. For bulk green tea extract orders the drum-and-liner packing is the standard, and if your process needs a different assay or a decaf grade, we confirm feasibility and lead time with our manufacturing partner within one business day rather than quoting blind. When you shortlist a green tea extract supplier, the lot COA is the document that separates sheets from results.
Frequently asked questions
What is green tea extract standardised to?
Total catechins at 50% or higher and EGCG at 25% or higher, both measured by HPLC, from a water extraction of Camellia sinensis leaf followed by spray drying. The powder is a yellow-green fine powder at 80 mesh, with loss on drying limited to 5.0% or less. A decaffeinated option is available for evening and sleep-positioned formulas.
What should I check when comparing green tea extract specifications?
Check the assay basis first: total catechins 50% or higher and EGCG 25% or higher, both stated with the HPLC method, because sheets written without the method cannot be compared line by line. Then the caffeine line and whether a decaf grade is offered, the mesh line (80 mesh), the loss-on-drying limit (5.0% or less), and residual solvents, which we hold within ICH Q3C limits. Ask each supplier for the lot COA that would ship with your order rather than a generic sample.
What is the MOQ, sample policy and lead time for green tea extract?
MOQ is 1 kg. Samples are drawn from production lots; the free quantity depends on the item's value, and anything beyond is billed at cost plus courier and quoted up front. In-stock items are ready in about 2 days, bulk production takes 3 to 5 working days after deposit, and transit is about 3 days Xi'an to Shenzhen plus about 6 days by air to major U.S. and EU airports, or 18 to 25 days by sea.
Related: Green Tea Powder — full specification, grades and documentation.