How to source gypenoside without guessing the grade
What we establish before quoting a gypenoside order. Most gypenoside enquiries arrive with a competitor price and no sheet, so the first thing we establish is the assay basis: gypenosides at 20% or 98%, measured by UV, from jiaogulan (Gynostemma pentaphyllum) herb extracted with water or ethanol-water. We then ask which application the powder is going into, because daily functional foods on one side and premium supplements and research on the other sit on different grades, and we confirm the carrier line — none for the pure extract, maltodextrin on request. Packing comes next: a 25 kg fibre drum with a double polyethylene liner as standard, foil bags for pilots, OEM under the buyer’s own brand if needed. Samples are always drawn from production lots, so what the buyer tests is the material that would ship; the free quantity depends on the item’s value and anything beyond is billed at cost plus courier, quoted up front.
Gypenoside is the saponin fraction of jiaogulan (Gynostemma pentaphyllum), the adaptogen sometimes called “southern ginseng” for its ginseng-like saponin profile, and it is one of the easier botanicals to mis-buy, because the market sells two very different grades under one name. The material we supply is a yellow-brown to tan fine powder, available at 20% for mass-market foods and 98% for premium supplements and research. This guide covers how to source gypenoside: what the material is, the specification line by line, which grade fits which market, and what a first order looks like. If you are comparing several suppliers at once, the mechanics below are the same ones we apply to every gypenoside quotation that leaves this desk.
What gypenoside is
The source line on the sheet reads jiaogulan (Gynostemma pentaphyllum), herb. The process line reads water or ethanol-water extraction — the solvent choice follows the grade and the destination market’s expectations, and it is worth stating which you need when you request the sheet. The assay line reads gypenosides at 20% or 98%, measured by UV. Two details matter before prices are compared. First, the method: UV is the standard assay basis for total saponins in this category, and a sheet that quotes a percentage without naming the method cannot be compared line by line with one that does. Second, the carrier line: ours reads none (pure extract) or maltodextrin on request, and that line changes both the assay maths and the flow behaviour of the powder, so it belongs on the sheet rather than in an email.
The gypenoside specification, line by line
| Line | Standard grade |
|---|---|
| Botanical source | Jiaogulan (Gynostemma pentaphyllum) — herb |
| Extraction solvent | Water / ethanol-water |
| Assay | Gypenosides 20% or 98% (UV) |
| Appearance | Yellow-brown to tan fine powder |
| Carrier / excipient | None (pure extract) or maltodextrin on request |
| Particle size | 80 mesh standard, 100 mesh on request |
| Loss on drying | 5.0% or less |
| Total ash | 5.0% or less |
| Packing | 25 kg fibre drum, double polyethylene liner |
| Shelf life | 24 months in unopened original packing |
The physical lines are the ones buyers skip and then ask about later. Loss on drying and total ash are each limited to 5.0% or less, and those two lines, together with the assay, are what the lot COA reports against. The mesh line reads 80 mesh as standard with 100 mesh on request; the standard grade blends into dry matrices without a separate milling stage, and the finer mesh is for processes that need it. The appearance line — yellow-brown to tan fine powder with a characteristic odour and taste — is what you check against the sample rather than against the sheet.
Which grade to choose: 20% or 98%?
The two grades serve different markets, and the choice is a commercial one before it is a technical one. The 20% grade is the standard production grade for daily functional foods and mass-market blends, where inclusion rates and cost per kilo matter more than concentration. The 98% grade is for premium dietary supplements and research and development, where the label carries a concentrated jiaogulan claim and the formulation budget follows. Tell us your label claim and target market and we will recommend the grade our other buyers in the same category use — usually within one email. Alternative assays can be produced to your specification; we confirm feasibility and lead time with our manufacturing partner before quoting rather than after.
What gypenoside is bought for
Four applications cover almost every enquiry we see:
- Daily functional foods (20% grade) — teas, instant beverage mixes and bar-style formats where the powder blends at 80 mesh without a milling stage
- Premium dietary supplements (98% grade) — capsules and tablets where the label carries a concentrated jiaogulan claim
- Adaptogen blends — combined with other botanical adaptogens such as rhodiola and epimedium, where a consistent UV assay keeps the blend’s declaration steady lot to lot
- Research and development — where the 98% grade is used as a reference material
What changes between these formats is not the material but the grade and the carrier, and the question to settle first is which assay your label and market need. As with every botanical we supply, the material is sold as a raw ingredient for manufacturing: we make no therapeutic claims for it, and finished-product label claims are the buyer’s responsibility in their own market.
What a first order looks like
- MOQ: 1 kg
- Samples and pilot runs: 1 kg and 5 kg foil bags, drawn from production lots
- Standard packing: 25 kg fibre drum with a double polyethylene liner
- Lead time: in-stock items ready in about 2 days; bulk production 3 to 5 working days after deposit
- Transit: Xi'an to Shenzhen consolidation about 3 days, then about 6 days by air to major U.S. and EU airports, or 18 to 25 days by sea
- OEM: packing under your own brand, artwork handled under confidentiality
Samples are always drawn from production lots, so what you test is the material that would ship; the free quantity depends on the item's value, and anything beyond is billed at cost plus courier and quoted up front. For bulk gypenoside orders the drum-and-liner packing is the standard, and if your process needs a different mesh or a maltodextrin carrier, we confirm feasibility and lead time with our manufacturing partner within one business day rather than quoting blind. When you shortlist a gypenoside supplier, the lot COA is the document that separates sheets from results.
Frequently asked questions
What is gypenoside standardised to?
The assay reads gypenosides at 20% or 98%, measured by UV, from jiaogulan (Gynostemma pentaphyllum) herb extracted with water or ethanol-water. The powder is yellow-brown to tan and fine, at 80 mesh as standard with 100 mesh on request, with a carrier line of none (pure extract) or maltodextrin on request. Loss on drying and total ash are each limited to 5.0% or less.
Which grade should I choose, 20% or 98%?
The 20% grade suits daily functional foods and mass-market blends; the 98% grade suits premium dietary supplements and research and development. Tell us your label claim and target market and we will recommend the grade other buyers in the same category use, usually within one email.
What is the MOQ, sample policy and lead time for gypenoside?
MOQ is 1 kg. Samples are drawn from production lots; the free quantity depends on the item's value, and anything beyond is billed at cost plus courier and quoted up front. In-stock items are ready in about 2 days, bulk production takes 3 to 5 working days after deposit, and transit is about 3 days Xi'an to Shenzhen plus about 6 days by air to major U.S. and EU airports, or 18 to 25 days by sea.
Related: Gypenoside — full specification, grades and documentation.